رابط کاربری ترجمه شده است. برخی متن‌های فنی مفصل هنوز انگلیسی هستند.
Solar planning tools

بار و نیاز برق

Build an appliance list to estimate daily electricity use and connected load.

دستگاه‌های شما

نمونه‌های قابل ویرایش

برآورد شما

Live calculation
روزانه · انرژی
13.19 kWh
مجموع · پیوسته · بار
2.04 kW
30 · روز · انرژی
395.76 kWh
Planning estimates, not equipment approval. Review the assumptions below before choosing a system.

Example wattages are editable. Enter nameplate or measured values for your actual appliances.

سامانه خورشیدی کامل →

This guide is available in English and Urdu. English is shown below.

What is this tool used for?

Use this tool to find how much electricity your appliances use in a day before planning a solar system. It is useful when you do not have a representative electricity bill or want to separate essential appliances from the rest of your home.

How to use this calculator

Add each appliance, then enter its quantity, electrical watts, daily operating hours and duty cycle. Use measured values where possible; duty cycle is the share of operating time during which the appliance draws the entered power.

Understanding your results

Daily kWh helps size solar generation. Connected kW shows the running power if every listed appliance is on together; it does not include starting surges. You can pass the load to the complete system calculator.

Common questions

Is a watt calculator the same as a kWh calculator?

Watts measure power at a moment; kWh measures energy over time. This appliance tool provides both connected running watts and daily energy. For a solar calculator, kWh demand helps size generation, while simultaneous power and startup surges determine inverter requirements.

Can I include lights when planning solar power?

Yes. Add the number of lights, electrical watts per light and hours of use to your appliance list. For a standalone solar light with its own panel and battery, this estimates only the lamp energy demand; it does not verify the built-in battery, charge controller or manufacturer runtime claims.

روش محاسبه

Daily energy = Σ(quantity × watts × hours × duty cycle) ÷ 1,000. Connected load assumes all listed appliances are on together; usage hours do not reduce connected load.

روش‌شناسی →

پیش از استفاده از نتیجه

Nameplate wattages are starting points. Refrigerators and inverter ACs cycle or vary their power: use measured average energy or an appropriate duty cycle. Starting surges are not included in connected load.

How should I enter an air conditioner?

Use its electrical input watts, not cooling capacity or tonnage. Adjust duty cycle for actual operation.

ادامه برنامه‌ریزی

همه ماشین‌حساب‌ها →
برآورد شما